Comparison
LD40
Description
LD40 is designed for industrial applications. There are two motor positions available which make it more flexible for installation in limited space. Default external reed sensors provide end of stroke indication to control unit. And additional reed sensor is optional as 'position reached' signal feedback.
Technical information
  • Input voltage: 12 / 24V DC
  • Max. dynamic load: 3000N (ACME) / 4000N (Ball Screw)
  • Max. static load: 4000N (ACME) / 6000N (Ball Screw)
  • Max. speed at no load: 20.5mm/sec (typical value)
  • Stroke: 100 / 150/ 200 / 250 /3 00 / 350 / 400mm
  • IP level: IP54
  • End of stroke indication: External reed sensors, NC type (normal close)
  • ACME or Ball Screw threaded spindle is available
  • Friction clutch for over load protection
  • Outer tube color: Anodized black or aluminum gray
  • Stainless extension tube
  • Power cord length: 250 mm (with tinned wires)
  • Duty cycle: 10%, max. 2 min. continuous operation in 18 min.
  • Operating ambient temperature: -25°C ~ +65°C
  • Certified: CE Marking, EMC Directive 2014/30/EU
Option
  • 'Position reached' signal feedback: The 3rd external reed sensor, NC type (normal close)
  • Standard motor position is on the right (Fig. 1). There is optional motor position on the left
  • Positioning signal feedback with Hall effect sensor x 2 (standard right motor option only)
Download
Application
Medical Care
Industrial
The products have beenadded, you can select up to 4 products for comparison.
Compare
I agree