MK35

Comparison
Inquiry
MK35
Description
MK35 is an intelligent actuator with a control board inside. Its robust mechanical design provides up to 10,000N thrust and is IP66/67/69K ingress protection rated. A variety of performance and control options are available to suit the user's application. MK35 is ideal for applications such as agriculture, construction and industrial automation.
Technical information
  • Spindle type: Ball screw
  • Input voltage: 12V DC / 24V DC (It is forbidden to use Pulse Width Modulation (PWM) as input power)
  • Max. load: 10,000N (Push/Pull)
  • Max. static load: 18,000N (Push)
  • Speed at no load: 63mm/sec (Typical value of gear ratio 5:1)
  • Stroke: 100 ~ 1,000mm (The max. stroke is depending on load, refer to Data Sheet)
  • Manual drive capable by an hexagon socket wrench
  • Stainless steel extension tube
  • IP level: IP66 (Dynamic) and IP67/IP69K (Static)
  • Salt spray tested for 500 hours
  • Built-in stroke limit switches
  • Various control options to suit the user’s application
  • Duty cycle: 15 ~ 25%. Refer to Data Sheet
  • Operating ambient temperature: -40°C ~ +80°C (Full performance +5°C ~ +40°C)
  • Certified: CE Marking, EMC Directive 2014/30/EU
Option
  • DC control
  • Low current signal control platform
  • SAE J1939 CAN Bus control platform
Application
Industrial
Outdoor
Agriculture
Back
Products Comparison
The products have beenadded, you can select up to 4 products for comparison.
Compare
I agree