Linear Actuator MD60

Comparison

Q'ty :

Inquiry

MD60

Description

MD60 is a quiet and powerful actuator up to 6000N thrust, designed for use in a variety of medical and home care applications such as patient hoist and bed.

Technical information

Input voltage: 24V DC
Max. load: 6000N (push) / 4000N (pull)
Typical speed at no load: 23 mm/sec
Typical speed at full load: 5.0 mm/sec (6000N load)
Stroke: 50 ~ 400 mm
Noise level: ≦53dB
IP Level: IPX4
Rear connector’s pivot orientation can be chosen in every 30 degrees.
Preset limit switches
Aluminum outer tube
Steel extension tube
Color: Light gray RAL 7035
Duty cycle: 10% and max. 2 min. continuous operation in 20 min.
Ambient operation temperature: +5°C ~ +40°C
Certified:
- CE Marking, EN 60601-1-2, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-8
- RoHS, Directive 2011/65/EU and commission delegated Directive (EU)2015/863, (EU)2017/2102

Option

Positioning signal feedback with Hall effect sensor x 1
Positioning signal feedback with Hall effect sensor x 2
Mechanical push only extension tube
Safety nut (in push direction)
IP Level: IPX6
QR1 quick release. Only go with motor and spindle code A8 or AC. And the loading conditions are shown in the table below for QR1 operation.
QR2 quick release: To retract actuator quickly by pinching the QR2 grip while emergency
MR3 manual release: To retract actuator slowly and put down the patient safely by turning the MR3 knob with hand when losing power in the application of patient hoist

Download

Application

Furniture

Medical Care

Back

MD60

Related Products